(BQ) The newly engineered metal matrix composite (MMC) of aluminium 7075 reinforced with 10 wt% of B4C particles were prepared by stir casting method. Experiments were carried out by adopting face centered central composite design of response surface methodology.
Nội dung trích xuất từ tài liệu:
Modeling and optimization of EDM process parameters on machining of Al 7075-B4C MMC using RSMAvailable online at www.sciencedirect.comProcedia Engineering 38 (2012) 685 – 690toi uu nhung khong rorangOpen access under CC BY-NC-ND license.1877-7058 © 2012 Published by Elsevier Ltd. Open access under CC BY-NC-ND license.doi:10.1016/j.proeng.2012.06.086686S. Gopalakannan et al. / Procedia Engineering 38 (2012) 685 – 690S. Gopalakannan et al. / Procedia Engineering 38 (2012) 685 – 690687688S. Gopalakannan et al. / Procedia Engineering 38 (2012) 685 – 690S. Gopalakannan et al. / Procedia Engineering 38 (2012) 685 – 690689
Modeling and optimization of EDM process parameters on machining of Al 7075-B4C MMC using RSM
Số trang: 6
Loại file: pdf
Dung lượng: 3.25 MB
Lượt xem: 13
Lượt tải: 0
Thông tin tài liệu:
Tìm kiếm theo từ khóa liên quan:
The electrical discharge machining The EDM processes Metal matrix composite Process parametersTài liệu có liên quan:
-
Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC–Co
7 trang 22 0 0 -
5 trang 16 0 0
-
9 trang 15 0 0
-
An Experimental Investigation of Machinability of Inconel 718 in Electrical Discharge Machining
7 trang 13 0 0 -
8 trang 13 0 0
-
Application of Taguchi-grey multi responses optimization on process parameters in electro erosion
8 trang 12 0 0 -
Effect and Optimization of Machine Process Parameters on MRR for EN19 & EN41 materials using Taguchi
7 trang 12 0 0 -
11 trang 12 0 0
-
8 trang 11 0 0
-
6 trang 10 0 0
