Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

Tài liệu có liên quan:

• Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings

  13 trang 30 0 0

• Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores

  17 trang 25 0 0

• Standard Test Method for Lamination Factor of Magnetic Materials

  3 trang 23 0 0

• Standard Practice for Sampling and Procurement Testing of Magnetic Materials

  4 trang 22 0 0

• Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

  7 trang 21 0 0

• Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current

  4 trang 20 0 0

• Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods

  11 trang 19 0 0

• Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys

  4 trang 19 0 0

• Standard Test Method for Ductility of Oriented Electrical Steel

  2 trang 18 0 0

• Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs

  12 trang 17 0 0

• Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

  6 trang 17 0 0

• Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

  11 trang 16 0 0

• Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

  5 trang 16 0 0

• Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens

  4 trang 14 0 0

• Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

  11 trang 13 0 0

• Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

  16 trang 13 0 0

• Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

  8 trang 13 0 0

• Standard Test Method for Ductility of Nonoriented Electrical Steel

  2 trang 12 0 0

• Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)

  6 trang 8 0 0

• Degradation of Tetracycline by composite catalyst derived from food waste and goethite

  9 trang 6 0 0